Ir para conteúdo
  • Cadastre-se

Livre Discussão Sobre Técnicas/métodos/geral Sobre O Fisiculturismo.


Visitante usuario_excluido22

Posts Recomendados

Publicidade

ae produzir esteroides e vender e crime ?

e e necessario muito conhecimento tecnico ? pq o axl disse que estava pensando em fazer seu proprio AEs

Precisa da "receita". Alguns compostos são gerenciados pelo exercito brasileiro, para segurança nacional, por isso para comprar vc precisa ter registro. Uma vez que consigam a reaçao e a formula... da para fazer sim, atravez de estudantes de quimica de universidades hehehehehe....

Abraços

Link para o comentário
Compartilhar em outros sites

ae produzir esteroides e vender e crime ?

e e necessario muito conhecimento tecnico ? pq o axl disse que estava pensando em fazer seu proprio AEs

Vender Drogas é crime né cara !!

Não é difícil não cara, tendo um laboratório e vontade(certo conhecimento químico) da pra fazer, agora conseguir os SAIS é outros 500. (Por isso não vemos todo mundo 'cozinhando AEs por aí).

Essas soluções nada mais são do que sais misturados a veículos e alguns compostos para evitar a saturação ou tornar a mistura homogênea, esterificados e comercializados.

ps. Falo isso dos compostos de testo, outras drogas, como HGH e outras são bem mais complicadas. HGH por exemplo envolve processo biotecnológico/bioquímico (acho que é esse o termo).

Editado por HE-MAN
Link para o comentário
Compartilhar em outros sites

Na verdade, comprar o sal eh relativamente facil, e entra facil no país. O problema é o risco, e tambem não é so jogar tudo e misturar, tem mto cuidado, se nao todos under seriam bons (tirando a subdosagem)

Eu acredito que a subdosagem é uma estratégia e não um erro, mas isso a gente nunca vai saber.

Link para o comentário
Compartilhar em outros sites

Na verdade, comprar o sal eh relativamente facil, e entra facil no país. O problema é o risco, e tambem não é so jogar tudo e misturar, tem mto cuidado, se nao todos under seriam bons (tirando a subdosagem)

Yep, comprar eh fácil.

Aqui no forum conheço um que compra qualquer coisa da China hahaha...eh você mesmo seu safado!!!

Mas nao eh tão simples a conversão dos sais.

Link para o comentário
Compartilhar em outros sites

Como tudo na vida tem jeitos e jeitos de fazer a conversão, tem doido que injeta algo com o processo abaixo:

Directions for converting Finaplix into trenbolone acetate

By: Ken Dahl

1s.JPG

4G kit with 1 Component TH-Belt

***NOTE---The Kit and the Finaplix is sold separately***

2s.JPG

Straighten out a paper clip and push pellets into magic solution

3s.JPG

Pellets in magic solution, let sit over night

4s.JPG

Dissolve Pellets, glue and binders at the bottom

5s.JPG

Take the 5CC syringe and draw out 3-5CC's sterile oil and set a side

6s.JPG

Add the rest of the sterile oil to the pellet solution and shake well.

7s.JPG

Insert funnel into the empty oil vial and place coffee filter into funnel. Pour solution into funnel and let sit over night to drain

8s.JPG

After draining overnight

9s.JPG

Gunk caught by coffee filter

10s.JPG

Insert 18G pin into final sterile vial to release the air when inserting the finished product. Attach 18G pin to Whatman filter and insert into vial

11s.JPG

Run solution through a hot tap water bath to reduce the viscosity and allow for ease of filtering.

12s.JPG

Take the 10CC syringe and draw out solution and filter through Whatman filter, you will do this a few times.

13s.JPG

When finished filtering product, take out the 5CC syringe with the 3-5CC sterile oil and filter through the Whatman to filter out any remaining tren in filter.

14s.JPG

Final Product 40ml 100mg/ml

Certamente aquele clips é esterelizado e o sujeito deve seguir o procedimento de assepsia das mãos :ohno01:

Link para o comentário
Compartilhar em outros sites

Como tudo na vida tem jeitos e jeitos de fazer a conversão, tem doido que injeta algo com o processo abaixo:

Directions for converting Finaplix into trenbolone acetate

By: Ken Dahl

1s.JPG

4G kit with 1 Component TH-Belt

***NOTE---The Kit and the Finaplix is sold separately***

2s.JPG

Straighten out a paper clip and push pellets into magic solution

3s.JPG

Pellets in magic solution, let sit over night

4s.JPG

Dissolve Pellets, glue and binders at the bottom

5s.JPG

Take the 5CC syringe and draw out 3-5CC's sterile oil and set a side

6s.JPG

Add the rest of the sterile oil to the pellet solution and shake well.

7s.JPG

Insert funnel into the empty oil vial and place coffee filter into funnel. Pour solution into funnel and let sit over night to drain

8s.JPG

After draining overnight

9s.JPG

Gunk caught by coffee filter

10s.JPG

Insert 18G pin into final sterile vial to release the air when inserting the finished product. Attach 18G pin to Whatman filter and insert into vial

11s.JPG

Run solution through a hot tap water bath to reduce the viscosity and allow for ease of filtering.

12s.JPG

Take the 10CC syringe and draw out solution and filter through Whatman filter, you will do this a few times.

13s.JPG

When finished filtering product, take out the 5CC syringe with the 3-5CC sterile oil and filter through the Whatman to filter out any remaining tren in filter.

14s.JPG

Final Product 40ml 100mg/ml

Certamente aquele clips é esterelizado e o sujeito deve seguir o procedimento de assepsia das mãos :ohno01:

se precisarem de uma cobaia eu coloco meu popô a disposição.. huauahuhuhuha. Não imaginei diferente. Nunca passou por minha cabeça homens de jaleco branco, mascara, luvas e maquinario ultra tecnológico... se alguém for brincar com seu kit de quimica e quiser montar uma trembo 110mg/mg e precisar de cobaia... só manda um MP... hauhauhuahuahuauh

Abraços

Link para o comentário
Compartilhar em outros sites

Crie uma conta ou entre para comentar

Você precisar ser um membro para fazer um comentário

Criar uma conta

Crie uma nova conta em nossa comunidade. É fácil!

Crie uma nova conta

Entrar

Já tem uma conta? Faça o login.

Entrar Agora
  • Quem Está Navegando   0 membros estão online

    • Nenhum usuário registrado visualizando esta página.
×
×
  • Criar Novo...